Mechanical Inspection Engineer Jobs in Abu Dhabi – UAE at Wood

Title: Mechanical Inspection Engineer

Company: Wood

Location: Abu Dhabi – UAE

Type: Full Time

Category: Engineering, Construction

We are currently recruiting a Mechanical Inspection Engineer to be worked on our ADNOC PMC project in Abu Dhabi region.

The successful candidate will be reporting to the Construction Manager I Senior Discipline Engineer Make sure that any activity offered for his inspection has an approved shop drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP).

Carry out all planned site inspections as per the intervention points marked in the relevant All site inspection shall be carried out vide an official Inspection and Test request (ITR) submitted by the CONTRACTOR through the proper Inspection status shall be recorded in the ITR and any relevant check sheet as per the approved QCP. Any outstanding items shall be verified prior to closing the In the event that CONTRACTOR excludes an item from an ITR, the item will be dealt with/inspected utilizing the ITR from which the item was excluded.

Verify with Independent Testing Laboratory (ITL) that all relevant test results related to specific ITR meets the project In the event he notices that the relevant Shop Drawing, materials used, MS, QCP and ITP do not cover all specification requirements, he should report the same in writing to the Construction Manager and the Senior Discipline Copy of such report shall be forwarded to COMPANY project manager.

Closely monitor site activities to ensure quality of WORK is in compliance with CONTRACT requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report to Senior Structural Engineer/ Construction Make sure that all materials used comply with the approved Material Approval Request (MAR).

Make sure that the CONTRACTOR’s personnel are using the latest edition of the approved shop drawings, MS, QCP and ITP as per the project master index

Closely monitor concrete pours and check continuously concrete materials delivered to site, ensure compliance with QA/QC procedures, and ensure all concrete tests are carried out as per CONTRACT Frequently check formwork/shuttering systems and ensure quality, safety and constructability aspects are Make sure that any non-conformity has been reported through a Non Conformance Report (NCR), reviewed by his line (Construction supervisor

IConstruction Manager as applicable). All NCRs shall be coordinated with the PMT Senior Quality Assurance Engineer.

Advise Planning Engineer and Construction Manager of any slippage of Progress regarding site Participate with PMC disciplines in reviewing the Close Out Report as submitted by Contractor

Review the relevant As-Built drawings as submitted by CONTRACTOR and make sure that all site conditions are properly Skills / Qualifications Should be qualified Engineer BSc or higher) The Inspection Engineer shall be a Qualified Engineer with minimum overall 10 years’ experience in Construction Supervision of similar projects. Company Overview Wood is a global leader in engineering and consultancy across energy and the built environment, helping to unlock solutions to some of the world’s most critical challenges.

We provide consulting, projects and operations solutions in more than 60 countries, employing around 45,000 people. Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and witho…


About Wood